We have been featuring rooting procedures for several Android devices in the past but there have been a few devices still missing in our Android rooting procedures guide, including Motorola Backflip. That’s why we are bringing you a complete guide that you can follow in order to root your Motorola Backflip running any version of Android.
Credit for bringing this rooting procedure to us goes to ModMyMobile forum member Skrilax_CZ who used the rooting method for Motorola Droid 2 and added Backflip specific modifications to get it working on the Backflip. Several users have tried this procedure out and have had success, so it’s quite reliable.
Unlike several other rooting procedures which require simply downloading an app to your computer or phone, running it and clicking or tapping a button, rooting Motorola Backflip requires the use of ADB commands as well as a terminal app on your phone. Though don’t let this intimidate you, as our instructions will even guide newbies through the process with ease.
Disclaimer: Please follow this guide at your own risk. AddictiveTips will not be liable if your device gets damaged or bricked during the process.Requirements:
- Before you begin, you must have ADB installed. In case you don’t have it already, see our guide on what is ADB and how to install it.
- Your computer must have the necessary Motorola USB drivers installed. For your convenience, we are proving the drivers for both 32 bit Windows and 64 bit Windows at the links given below. Just unzip the downloaded file and run the installer. while your phone is not connected to your PC.
- Download the files required for the rooting procedure from the link given below and extract the zip file’s contents to a folder on your computer. We shall be using C:\MotoRoot for the purpose.
- You will need a terminal app installed on your Android phone. If you don’t already have one, you can install ‘Android Terminal Emulator’ by searching for it at the Android Market, via AppBrain from the link given below or by scanning this QR Code. We shall be using this app in our guide but you can use another if you like.
- Enable USB debugging mode on your phone from Menu > Settings > Applications > Development.
- Connect your phone to your PC via USB and set connection to PC Mode i.e. Charge Only.
- Launch a Command Prompt window on your computer and enter the following commands:
adb push c:\MotoRoot\Superuser.apk /sdcard/Superuser.apk adb push c:\MotoRoot\su /sdcard/su adb push c:\MotoRoot\rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin adb push c:\MotoRoot\install-root.sh /data/local/tmp/install-root.sh adb shell cd /data/local/tmp chmod 0755 rageagainstthecage-arm5.bin chmod 0755 install-root.sh
- Keep your phone connected to your PC, launch ‘Android Terminal
Emulator’ or your favorite terminal app on it and enter the following
commands in the app:
cd /data/local/tmp ./rageagainstthecage-arm5.bin
- You should eventually see this output on the phone:
[+] Forked xxxx childs.Once this message appears, tap the Enter key and then enter the ‘exit’ command. That should close Terminal Emulator.
- Launch Terminal Emulator on your phone again. If you see a # prompt,
proceed to the next step. If you don’t see it, reboot the phone and try
again.Note: In case you can’t get the # prompt even
after rebooting, repeat steps 4, 5 and 6 to try again. If you still have
no luck with getting the # prompt, use these ADB commands on the
adb kill-server adb devices adb shellYou should now have a # prompt.
- Finally, in Terminal Emulator on your phone, enter the following commands:
/data/local/tmp/install-root.sh exit exit
Download Motorola USB Drivers for Windows (32 bit)
Download Motorola USB Drivers for Windows (64 bit)
Download Android Terminal Emulator via AppBrain
Download Rooting Files for Motorola Backflip