W8 Walkman Android 2.3.7 v019 GingerDX သို႕ update လုပ္ရေအာင္။ Xperia Active Launcher Download Link : http://www.multiupload.com/RCI41IWU1A Tutorial How To Root W8 To Android 2.3 GingerDX Download These File First
:http://www.4shared.com/file/zvI0Lv2q/SuperOneClickv191-ShortFuse.html http://www.4shared.com/file/3BuwWfWr/xRecovery01.html http://www.4shared.com/file/XdtGx9oo/Root_Explorer_v216.html GingerDX ROM http://www.multiupload.com/BNMY1G8RV1 Just Follow This Step Step 1: Root your W8 - download and unzip SuperOneClickv1.9.1-ShortFuse to PC Desktop - connect W8 to PC (Do not mount) - on your phone [goto] [setting] [applications] select [unknown sources] - on your phone [goto] [setting] [applications] [development] select [usb debugging] - Launch SuperOneClick, click [Root] - If it ask something about Busy Box just click Yes - you will see - [not successful - is your phone software higher than 2.0?] - click [yes] and then [success] & [test su] message (this last part might not appear the same as It's written here, so just use your common sense to get through) If you are successful in ROOTING your phone - SuperUser app will be installed to your W8. If you are not successful:- (a) check your PC [devices] [usb] to see if your phone is recognized by your PC (troubleshoot PC driver problem) (b) [usb debugging] in your W8 phone settings enabled? Then [Launch] [SuperOneClick] and try again. Install any File Manager from Android Market, such as Astro File Manager. Step 2: Mount W8 (to access SD Card) - copy [Root.Explorer.v2.16.apk] to root of SD Card - using PC create folder [xRecovery] and unzip xRecovery0.1.rar - put the 3 files into the xRecovery folder you've created - copy the xRecovery folder to root of SD Card Step 3: UnMount W8 from PC Step 4: Launch [Astro File Manager] Install [Root Explorer v2.16.apk] Step 5: - Launch [Root Explorer] - scroll down to /sdcard [click to access] - scroll down to xRecovery folder [click to access] - Select each of the 3 files (one by one) [click & hold] [copy] - [click] parent folder (twice) - scroll down to [click to access] [system] - [click to access] [bin] and [click] [Mount R/W] (R/W as in Read/Write) - press [paste] button Now your Phone should be rooted and ready to install your Android 2.3.7 Step 1: Make a backup copy of your Android Eclair 2.1 using xRecovery - check that your phone's SD Card has at least 650MB of free space [SD card free space is to hold both your phone original backup ROM and the 2.3 ROM] - shutdown your W8 and wait 5 seconds and then [reboot] your phone. - when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu. - select [backup and restore] [backup] from the menu NOTE: - This will create a backup file in your SD Card [SD/xRecovery/backup] - After you have completed the backup using xRecovery, it will return to the menu screen. - Now choose [reboot] - your W8 phone should restart Step 2: Download GingerXperia ROM (something you probably already did with the links above) - [mount] your W8 and copy this file [GingerDX.zip] into SD card - [unmount] and shutdown your W8 Step 3: Installing the 2.3.7 ROM on your W8 - [boot] W8 - when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu. - [select] [factory reset (full wipe)] - scroll down and hit [install custom zip] - select [GingerDX.zip] from your SD card & hit [yes] - xRecovery will start to install the 2.3.7 ROM on your phone. - when it is done, xRecovey will go back to the startup menu - [click] [reboot] If you are stuck in the GingerDX startup screen for more than 5 minutes, just try restart the phone and It should be fine. Took me 2 restarts before the new ROM took action.
ဒီအဆင့္က 2.3.7 ကိုသင္မၾကိဳက္ရင္ အရင္ Official Rom ကိုျပန္ခ်ိန္းႏိုင္ရန္အတြက္ပါ။ RESTORING THE Official Android Eclair 2.1.1 ROM - [shutdown] wait 5 seconds [reboot] W8 - when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu. - [select] [factory reset (full wipe)] - scroll down and hit [backup/restore] [restore] - you should see your original 2.1 backup ROM - [select] [2011-10-xx.xx.xx.xx.ROM] [restore] [it should look something like 2011-05-06.21.01.23] - xRecovery will start to install the original 2.1.1 ROM [the ROM you've backed up in Step 1] from your phone's SD Card. - when it is done xRecovey will go back to the startup menu - [click] [reboot] 100% အဆင္ေျပပါတယ္။ကြ်န္ေတာ္ကိုယ္တိုင္ စမ္းပီးမွတင္ေပးလိုက္တာပါ။လံုး၀ၾကိဳက္ႏွစ္သက္က်ပါလိမ့္မယ္။ ၤFirmware update လုပ္ျပီးသြားရင္ေတာ့ ကြ်န္ေတာ္တို႕ Multitouch စနစ္ ကိုထည္႕သြင္းရေအာင္ အရင္ဆံုးေအာက္က ax8mt.ko ဖိုင္ကိုေဒါင္းေလာ့ရယူပါ။ျပီးရင္ အဆင့္ေလးေတြအတိုင္း လုပ္သြားပါ။ပီးတာနဲ႕ ဖုန္းကို ပါ၀ါပိတ္ပီး ျပန္ဖြင့္လိုက္ပါ။Multitouch စနစ္လုပ္တာေအာင္ျမင္သြားပါပီ။ Download Link ax8mt.ko http://www.mediafire.com/?ox2h7e3o8pphamf 1) Copy ax8mt.ko to sdcard 2) Open the root explorer 3) Go to sdcard and then move ax8mt.ko to system/lib/modules 4) Before your paste make sure your tap Mount/Ro and then paste 5) Quit root explorer 6) Open Terminal Emulator 7) Type su 8) Type insmod /system/lib/modules/ax8mt.ko 9) Type dmesg Enjoy your Multitouch :) ရဲလင္းေအာင္ firstname.lastname@example.org