Mobile House မန္ဘာ မ်ား ေက်းဇူး ၿပဳ ၿပီး www.mobilehouse.co.nr မွ တိုက္ ရိုက္ ၀င္ေပး ပါ ရန္ ႏွင္႔ အသစ္ တင္ သမွ် ကို သိရွိ ေစရန္
https://www.facebook.com/MobileHouseServiceCentre
မွာ Like လုပ္ ေပး ၾက ပါ ....

Saturday, December 1, 2012

Huawei C8825 Root လုပ္နည္း

Huawei C8825 က နဂို စက္ရံု ထုတ္ ကတည္း က bootloader က lock ၿဖစ္ ေန ပါ တယ္ ။Root လုပ္ ဖို႕ အတြက္ ကို bootloader ကို unlock အရင္ လုပ္ ရပါမယ္ ။ တရုတ္ ဆိုဒ္ ၿဖစ္ တဲ႕ အတြက္ Google Chrome က ေန ၀င္ ေရာက္ လွ်င္ English လို ေၿပာင္း ေပး ပါတယ္ ။ 

အႏွစ္ ခ်ဴပ္ ေၿပာ ရ ရင္ Unlock bootloader အရင္ လုပ္ ။ Recovery သြင္း ။သြင္းလိုက္ တဲ႕ recovery က ေန update.zip  ကို သြင္း လိုက္ ရင္ ၿပီး ပါ ၿပီ ။ကၽႊန္ေတာ္ သီးသန္႕ ဘာသာ မၿပန္ ေပးေတာ႕ ပါ ဘူး ။





unlock code အရင္ ယူမယ္?               Application Address: http://www.huaweidevice.com/cn/servicePolicy.do?method=toApplyUnlock

IMEI / MEID get 
dial-up interface input * # * # 2846579 # * # * to enter the engineering mode 
turn into: projectmenu-> veneer basic information query -> Other inquiries: 
you can see the product IMEI / MEID "and" product S / N No. "

 


Please go to the the the Huawei unlock website application, address: http://www.huaweidevice.com/cn/servicePolicy.do?method=toApplyUnlock   
  




Unlock code, how to use a key to unlock tool? 


Note: to unlock the phone, back up a good user data in advance. Unlock the phone after the success will automatically restore the factory settings and lost Widevine function.

Step 1: Prepare the work
   Please complete the following three preparations
A properly installed on the PC phone driver.
2, has access to phone only unlock password.
3, download the unlock tool.


Step 2: unlock operation

1, the mobile phone into fastboot mode:
First phone completely shut down (note that need to be in the setup menu to turn off the "Quick Start" feature, or unplug the battery after shutdown, more than two seconds, and then re-insert), then press the volume down key and power button at the same time, and keep more than 10 seconds of time, stay in power on the first screen that Huawei logo like this is to enter fastboot mode.


2, to perform the unlock tool:
The fastboot mode phone and PC via a USB cable to connect. Unlock tool (unlock.bat or a key to unlock the same tools and then run on the computer.), Then follow the prompts, and enter the unlock code of 16, for example: 1234567812345678.
 


3, wait for the phone to unlock complete:
After entering the unlock password, the phone will automatically restart If you enter the correct password, the phone will enter the restore factory settings mode, restore the factory settings is complete, the phone automatically restart to complete the unlock operation. If the user enters the password information is incorrect, the phone will direct restart the IDLE interface.


4 how do you know whether unlock success?
After entering the unlock code, if you see the phone displays a robot background, Format partition tips is to unlock success.
Can also be checked using a key to unlock the tool, as shown: Note: after unlock successful, the user if you want to re-lock the phone to use google Widevine function, you will need to do the following: First, the SD card upgrade resume the mobile version for the the Huawei official release version; then enter fastboot mode, typing the command fastboot oem lock **************** The phone will automatically restart, and then set the phone to "RELOCKED" state. In this way, you can normally use google Widevine function.



Point this direct download:
 Huawei, a key to unlock tool zip (469.58 KB Downloads: 3711) 


If the above can not be downloaded to the network disk download: Huawei network disk: 
http://dl.vmall.com/c0yii2oapp

 Unlock လုပ္ ၿပီး ၿပီ ဆိုရင္ Root လုပ္ လို႔ ရပါၿပီ ။

 
Driver လို ရင္
The computer needs to be installed Huawei C8825D phone drive

phone to enter the the bootloader state of ( state is often said that the first screen )
( 1 ) on the phone, select "Settings", dragged down, find the "Quick Start" Close
( 2 ) off, and unplug the cable. And shut down the computer, open the pea pod, mobile assistant tools
( 3 ) and then press the volume down + power button for 10 seconds or so to stay in the first screen only displays the state of the Huawei chrysanthemum, is to enter the bootloader


To connect your phone to your computer, run the brush into the Recovery tool , follow the prompts

( some jiyou to fail this step, you can check what has been unlocked, or the drive is functioning properly, or change a USB port to try, if the driver is installed you can disconnect the battery to restart once the phone, then re step can only drive life and death is not loaded up another computer to try him. )

4 , has been the next step will brush into recovery until the recovery partition update is completed, then press any key on the phone will restart, if the phone does not automatically restart, reboot
Note the writing "recovery" behind the corresponding " OKAY "

5 , into the recovery method: hold down the volume + power button is turned on, and hold the button until you get to the Recovery of the Chinese

Enter the recovery key description:
A == to move the volume down
Back on a volume ==
Confirm the selection power key ==

Second, the use of recovery Brush Root

1, the update.zip to your phone SD card to any directory, it is recommended that into the root directory.

2, shut down, while holding down the volume keys and power button , do not let go. Then wait a little longer to enter the Recovery mode.
 
3, press OK to enter the next level menu, choose Brush from the SD card .
(If you have just the update.zip on the root directory, you can also directly select the the "update.zip Brush)


4 , press OK to enter just the update.zip on the directory select the ZIP file from the SD card .


5 package file, select the Brush confirmation menu, press OK to enter.


6 , select Yes - install update.zip , press OK to start the brush. 7 , following prompt instructions Brush completed, press the return key to return to the main menu on OK to restart the phone .




8 phone running the software running if you need root privileges will automatically prompt the back you know how to do it :) of C8825D dedicated root tool download address: (Reply visible Download)






Baidu network disk:   c8825 root.zip

recovery Download
 recovery6.0.1.2_C8825d.exe 

ဆက္ဖတ္ရန္>>>

HUAWEI ASCEND Y200 Root လုပ္နည္း

HUAWEI ASCEND Y200

 

သတိ တစ္ခုခု ၿဖစ္လွ်င္ ၿပဳလုပ္သူ တာ၀န္ သာၿဖစ္ သည္ !  
ဒီနည္း ကို မယံုၾကည္ ဘူး ဆို လွ်င္ တ ၿခား နည္း ထြက္တဲ႔ အထိ ေစာင္႔ လိုက္ပါ ။ 

ေတာင္းထား တဲ႔ သူေတြ မ်ား လို႔ တင္ေပးလိုက္ပါတယ္ ။


Chapter I - Preparation 
              Driver အရင္ သိေအာင္ လုပ္ ရပါမယ္ ။


  • Put the phone when switched on to the computer.


  • It appears a new CD drive, where a folder "drivers" in it. Please install the driver
    Code:
    CD-ROM: \ drivers \ adb_driver
  • Go to the Phone Settings -> Apps.
  • Disable Quick Launch
  • Go into the sub-punk Development and Enable USB debugging
  • Charging you down root_v5.2.zip and extract it to a folder on your PC
  • invite you superuser -3.0.7-signed.zip EFGHI-down grab the zip file on your SD (not unzip) card
Chapter II - CWM install


  • Turn off the Y200.
  • Hold [Power] + [Volume Down] key for about 10-15s [The phone is the logo stand. Do not worry, it is not stuck, but in the so-called Fast Boot Mode]
  • plugs in the phone to the PC
  • Start the root_v5.2.bat
  • The program will first check whether the device is in fastboot mode.
  • If the check was Posotiv -> ENTER
  • Driver သိ လွ်င္ ေအာက္ ကပံု လို မ်ိဳး ၿပ မယ္ ။မသိ ရင္ အေပၚ ကလို ၿပ ပါမယ္ ။

  • The script then loads another recovery
  • Now disconnect the device from the USB cable and remove the battery
  • Hold POWER and VOLUME UP simultaneously firm and sets the purely battery (keys continue to hold, do not release when a menu appears)
  • On the Händy then a menu appears we are in recovery mode ..
Now we have 2 options: Fully Automatic (recommended) or manually. Is your decision. Both goes. 



Chapter III version 1 - root -install fully automatic
  • Holding the phone via USB to the computer freezes and wait until the Windows Typical USB Geräausch angestöpselt noise comes
  • let the script go through the next step 
    (it runs 3x through security)
  • Confirmed on the phone with the power button to reboot
Chapter III version 2 - Install rooot - Manual


  • Get moving with the VOLUME DOWN button to the info install zip from sdcard and confirmed with the power button
  • choose zip from sdcard and confirmed with the power button
  • selects the Superuser -3.0.7-signed.zip EFGHI- out & confirmed with the power button
  • Navigated in the prompt to Yes and confirm with the power button
  •  
  • Root explorer သြင္းၿပီး ၀င္ လိုက္ပါ  root access ေတာင္း ရင္ root ၿပီး ပါ ၿပီ ။

ဒီမွာေဒါင္း ပါ ။
Download Here

Attached Files

File Type: zipSuperuser-3.0.7-signed.zip EFGHI (613.0 KB, called 4529x)
File Type: zipRoot_Y200_v5.2.zip (5.98 MB, 5560x)
ဆက္ဖတ္ရန္>>>