Mobile House မန္ဘာ မ်ား ေက်းဇူး ၿပဳ ၿပီး www.mobilehouse.co.nr မွ တိုက္ ရိုက္ ၀င္ေပး ပါ ရန္ ႏွင္႔ အသစ္ တင္ သမွ် ကို သိရွိ ေစရန္
https://www.facebook.com/MobileHouseServiceCentre
မွာ Like လုပ္ ေပး ၾက ပါ ....

Thursday, November 29, 2012

တရုတ္ ကီးဘုတ္

တရုတ္ ကီးဘုတ္ လို ခ်င္ တဲ႕ သူ ေတြ အတြက္ တင္ေပးလိုက္ပါတယ္ ။

ဒီမွာ ေဒါင္းပါ ။

搜狗手机输入法(sogou input)的iconsogou input


Version:1.6.5
version :Android 1.5 မွ အထက္
Download Here


 

谷歌拼音输入法(Google Pinyin IME)的iconGoogle Pinyin IME

  

Version:1.4.0

version :Android 1.5 မွ အထက္

 download Here

 

 

百度输入法(拼音笔画五笔)的icon Baidu Inc.

 
 

Version:2.1.1.6

version :Android 1.5 မွ အထက္

install လုပ္ ၿပီးရင္  “Settings” -> “Language & keyboard settings” ကိုယ္သံုး ခ်င္ တာ အမွန္ၿခစ္ ထားပါ ။ေၿပာင္းခ်င္ရင္ စာရိုက္ တဲ႕ တစ္ေန ရာ ဖိထား ပါ input ဆိုတာ ေလးေပၚ လာမည္ ေရြး လိုက္ပါ ။4.0 ေတြ က အေပၚ ဘားတန္း မွာ ကီးဘုတ္ခ်ိန္း လို႔ ရပါတယ္ ။

 ၾကိဳက္တာ ေဒါင္း ၿပီး သံုးၾကပါ ။

 

ဆက္ဖတ္ရန္>>>

Monday, November 26, 2012

ဒီဆိုဒ္ ထဲ ေဒါင္း ရတာ ခက္ခဲရသည္႕ အေၾကာင္းအရင္း

 မန္ဘာ မ်ား ကို ခု တေလာ ဒီဆိုဒ္ ထဲ ေဒါင္း ရတာ ခက္ခဲရသည္႕ အေၾကာင္းအရင္း

ကၽႊန္ေတာ္ ၀ယ္ ထား တဲ႕ hotfile အေကာင္႔ က ေန တင္ ရင္ လင္႔ မပ်က္ လို႕ အဲက ကတင္ ေပးေန တာ ေၾကာင္႔ ပါ ။
အေကာင္႔ မ၀ယ္ ထားရင္ သူ ကအခ်ိန္ ေစာင္႔ ၿပီး မွ ေဒါင္း ရ ပါတယ္ ။speed ကို လဲ ထိန္းထားတာေၾကာင္႔ ကြန္နက္ ရွင္ မေကာင္းတဲ႕ အခ်ိန္ ေဒါင္း မရ ပါဘူး ။

 ေနာက္ ဆို ရင္ေတာ႔ လင္႔  ႏွစ္ခု တြဲ ၿပီး ၿဖစ္ ေစ တၿခား လင္႔ က ၿဖစ္ ေစ တင္ေပးသြားမည္ ၿဖစ္ ပါတယ္ ။

အဆင္ေၿပ ၾကပါေစ ..................

                                              Admin
ဆက္ဖတ္ရန္>>>

Lenovo A60+ root

Backup ဆြဲ ထားပါ လိုခ်င္ တာ ေတြ ။တစ္ခုခု ၿဖစ္ လွ်င္ ၿပဳ လုပ္သူတာ၀န္ တာ ၿဖစ္ သည္ ။

ဒါ http://www.4shared.com/zip/q1IM8Ygc/wwwmobilehouseconr.html အရင္ေဒါင္းလိုက္ ပါ ။

SP_Flash_Tool_v3.1220.01 + A60+.boot+ a60+
 driver ပါတယ္ ။ a60+ driver ထဲ က ဟာ နဲ႕ အရင္ စမ္း မရ ရင္ ေအာက္ က နည္း နဲ႕ စမ္း ပါ ။

Driver သြင္းဖို႔အတြက္ ဖုန္းကို ပါ၀ါပိတ္ၿပီး ဓာတ္ခဲျဖဳတ္ထားပါ။ ေနာက္ ဖုန္းနဲ႔ကြန္ပ်ဴတာကို USB ၾကိဳးနဲ႔ခ်ိတ္ပါ။
ၿပီးမွ ဓာတ္ခဲကို ထည့္ပါ။ ဒါဆိုရင္ Computer မွာ MT65xx လိုမ်ိဳး Driver လာေတာင္းပါမယ္။ အဲ့ဒီအတြက္ ခုဏက ျဖည္ခ်ထားတဲ့  ဖိုဒါကိုညြန္းေပးၿပီးေတာ့ Driver ကိုသြင္းပါ။

 

Flash လုပ္နည္း

Driver လည္း ေအာင္ျမင္စြာ သြင္းၿပီးသြားၿပီဆိုရင္ေတာ့ ဖုန္းကို ကြန္ပ်ဴတာကေနျဖဳတ္ၿပီး ဓာတ္ခဲလည္းျဖဳတ္ထားပါ။
A60+升级工具 ဖိုင္ကို ျဖည္ခ်ပါ။ ၿပီးရင္ အထဲထဲက Flash_tool.exe ကို run ပါ။

၁.scatter-loading  ေနရာကိုႏွိပ္ၿပီးေတာ့ ခဏ ကျဖည္ခ်ထားတဲ့ Flash Tool ဖိုဒါထဲက MT6575_Android_scatter_emmc.txt ဖိုင္ကို ေရြးေပးပါ။
1.gifၿပီးရင္ေအာက္ က ၂။ BOOTIMG ေနရာကို အမွန္ျခစ္ပါ။ ၿပီးရင္ ႏွစ္ခ်က္ႏွိပ္ၿပီးေတာ့ 联想A60+.boot  ထဲ က boot.img  ဖိုင္ကိုေရြးပါ။
ၿပီးၿပီဆိုရင္ ၃ ေနရာက Download ကိုႏွိပ္လိုက္ပါ။ ၿပီးရင္ ဖုန္းနဲ႔ ကြန္ပ်ဴတာကို USB ထုိးပါ။ ၿပီးမွ Battery ကိုထည့္ပါ။
ဒါဆိုရင္ Flash tool နဲ႔ ဖုန္းနဲ႔သိသြားၿပီး အနီေရာင္ဘားေလး အရင္ေျပးပါမယ္။ ၿပီးရင္ ဒုတိယတစ္ခါ အ၀ါေရာင္ေျပးပါမယ္။
အားလံုးၿပီးသြားၿပီဆိုရင္ေတာ့ ေအာက္ကပံုအတိုင္းေပၚလာရင္ေတာ့ ေအာင္ျမင္သြားပါၿပီ။

Success.gif


အစိမ္းေရာင္အကြက္ေလးနဲ႔ OK ျပၿပီးသြားၿပီဆိုရင္ေတာ့ ဖုန္းနဲ႔ ကြန္ပ်ဴတာနဲ႔ျဖဳတ္ၿပီးေတာ့ ဖုန္းကို ပါ၀ါျပန္ဖြင့္ၾကည့္ပါ။


 
ဆက္ဖတ္ရန္>>>

Thursday, November 22, 2012

Myanmar HipHop Channel.apk by Mobile House

Myanmar HipHop Channel

HipHop ၾကိဳက္ တဲ႕ သူေတြ အတြက္ Mobile House က ေန  Android မွာ အလြယ္ တကူ ၾကည္႕ ရေအာင္ apk ဖိုင္ ေလး ဖန္တီး ေပး လိုက္ ပါ တယ္ ။

Download Myanmar HipHop Channel Android App
 
Scan
QR code
Download Myanmar HipHop Channel Android App
ဆက္ဖတ္ရန္>>>

ၿမန္မာေဖာင္႔ မလို တဲ႔ ၿမန္မာ android app - Chat ၊ Browser ၊ SMS ၊ Email

Root က ေတာ႔ မလုပ္ ေလ ေကာင္း ေလ ပါ ပဲ ။ Root လုပ္ ရင္ ဖုန္း ကို 40% ေလာက္ ပို ပ်က္ ႏိုင္ ပါတယ္ ။ 
ထို႕ ေၾကာင္႔ Root လုပ္ စရာ မလို ပဲ ၿမန္မာ လိုအသံုးၿပဳ ႏိုင္ မည္႔ Application မ်ား  ေတြ ကို Mobile House က ေန မွာ တင္ေပး လိုက္ ပါ တယ္ ။



ၿမန္မာ website ေတြ ၾကည္႕ ဖို႕ Browser ႏွစ္ မ်ိဳး ၊gtalk ၿမန္မာလို ခ်က္ ဖိုChat for MM ။  massage ၿမန္မာ လို ပို႔ ခ်င္ ဖတ္ ခ်င္ သူ ေတြ  ႏွင္႔ Email ၿမန္မာ လို ပို႔ ခ်င္ ဖတ္ ခ်င္ သူ အတြက္ MM SMS ႏွင္႔ MM Email ကို တင္ ေပး လိုက္ ပါ တယ္ ။









1st MM Browser


App Screenshots

Screenshot of 1st Myanmar BrowserScreenshot of 1st Myanmar Browser


Download Here


MM SMS


App Screenshots



Download Here



MM Email



App Screenshots





Download Here



MyanBrowser


App Screenshots

Screenshot of MyanBrowserScreenshot of MyanBrowserScreenshot of MyanBrowser


Download Here



Chat for MM


App Screenshots


Download Here


Mobile House ကို Android ဖုန္း ေပၚ က ေန ၾကည္႕ မယ္
 ( ဒါ ကေတာ႔ ၿမန္မာေဖာင္႔ လို တယ္ )

Mobile House လာ ေရာက္ လည္ ပတ္ ေလ႔လာ သူမ်ား အဆင္ ေၿပ ေအာင္ Mobile House Website .apk ကို ထုတ္ ေပး လိုက္ ပါ ၿပီ ။


ဒီမွာေဒါင္း ပါ ။

Hotfile Download

4shared Download


http://www.mobilehouse.co.nr

Mobile House
ဖုန္းအထူး ၿပဳၿပင္ ေရး ႏွင္႔ အေရာင္းဆိုင္ 


လမ္း၃၀ . ၇၃ - ၇၄ လမ္း ၾကား ။ ေဆးေက်ာင္း ေရွ႕ ။ မန္းေလး ၿမိဳ႕ ။
ဆက္ဖတ္ရန္>>>

MyanBrowser

ၿမန္မာ browser အသစ္ ေလး ပါ ။ၿမန္မာ ေဖာင္႔ ထည္႕ ထား ဖို႕ မလို ပါ ဘူး ။

MyanBrowser




MyanBrowser

Description

To download and support me,, NO ADS on premium version.You can download from following link:
https://play.google.com/store/apps/details?id=org.kmtech.premium
(Just only $0.99)
Facebook page : https://www.facebook.com/MyanBrowser
[✔]Impressive black browser theme! Definitely, you will love it :)
[✔]MyanBrowser is an open-source browser for Android 4 and above.
[✔] Redefine and enhance for Tablet user.
[*] No need root user access.
[*] No need to change UI font.
[*] No need to install Zawgyi-One and WinInnwa font.
[*] Support input text display (Zawgyi-One font)
Features:
- Unlimited tabs (switch by swiping right/left);
- All basic browser features;
- Import/export from/to SD card;
- Search from url bar;
- Plugins support (Flash);
- Support most of the Myanmar website.
- Best Myanmar browser experience for Android 4.0 and above
<< Thanks for support me >>
(All browser features are from Tint Browser)

ဒီမွာ ေဒါင္း ပါ ။
 https://hotfile.com/dl/180431171/173e83e/MyanBrowser.apk.html

http://www.4shared.com/android/WlqhYNtq/MyanBrowser.html

App Screenshots


ဆက္ဖတ္ရန္>>>

Chat for MM

Root လုပ္ လို႔ မရ လို႔ ၿမန္မာ ေဖာင္႔ ထည္႕ မရ လို႔ စိတ္ ညစ္ မေန ပါ နဲ႕
ဒါ ေလး နဲ႔ ခ်က္ ရင္ ၿမန္မာ လို ခ်က္ လို႔ ရပါ ၿပီ ။



http://www.4shared.com/android/lLry2byX/Chat4MM.html

Description

Chat 4 MM is chat client which can type/read in Myanmar language. It is based on yaxim open source jabber client for android.
Features
- Enable to work with Gtalk and Jabbir servers.
- Myanmar font(Zawgyi) embedded (* ၿမန္မာေဖာင္႔ ထည္႕ထားရန္ မလို*)
- Secure Chat
- Work well with Frozen Myanmar Keyboardand itexmm2 from play.
- All basic chat application feature.
Developer က Joe Win ပဲ ၿဖစ္ ပါ တယ္ ။

App Screenshots



https://hotfile.com/dl/180429837/eb567a1/Chat4MM.apk.html


http://www.4shared.com/android/lLry2byX/Chat4MM.html

စာရိုက္ ဖို႕ကို ေတာ႔Frozen Myanmar Keyboardေလးသံုးလိုက္ပါ ။


(download from Here )


ဆက္ဖတ္ရန္>>>

Mobile House ကို Android ဖုန္း ေပၚ က ေန ၾကည္႕ မယ္

Mobile House လာ ေရာက္ လည္ ပတ္ ေလ႔လာ သူမ်ား အဆင္ ေၿပ ေအာင္ Mobile House Website .apk ကို ထုတ္ ေပး လိုက္ ပါ ၿပီ ။


ဒီမွာေဒါင္း ပါ ။

Hotfile Download

4shared Download

ဆက္ဖတ္ရန္>>>

Wednesday, November 21, 2012

Samsung Galaxy Ace S5830 ၿဖဳတ္ နည္း


ၿဖဳတ္ရန္ လိုအပ္ ေသာ ပစၥည္းမ်ား : Phillips screwdriver, plastic tool such as a guitar plectrum or credit card.

  • Remove your back cover, battery, sim and memory card. Then remove the seven screws you can see, circled below.
 

  • Next, slide something thin and flat into the battery compartment, as shown below. This will release the battery compartment.

  • Lift the battery compartment from the bottom and then lift it over the corner indicated by the arrow. A little force is required.

  • With the battery compartment removed, your phone should look like below. A ribbon connector, circled below, needs to be disconnected. This attaches like a plug and socket. Just lever it up to unplug. On the left and right side of the phone are the power and volume switches. These are permanently connected to the circuit board but are stuck to the side of the housing with double sided tape. Carefully peel them away from the side of the housing, leaving them connected to the circuit board. The mic, indicated by the arrow at the bottom of the phone, is attached in the same way and also needs to be lifted away from the housing.

  • With the ribbon disconnected and the power, volume button and mic lifted away from the housing, your phone should look like below.
 
  • Lift the circuit board from right to left and you'll see it's still attached to the phone by another ribbon, circled in the photo below. Again, this attaches like a plug and socket and can be levered away from the circuit board.

 
  • The circuit board should now be free, as shown below. The ribbon connectors for the camera and jack socket are circled below. Again, these attach like a plug and socket and can be levered away from the circuit board.  
 

  • Below you can see the camera and jack socket once they have been removed.

 
  • The next stage is to disconnect the ribbon which comes from the touch screen/digitizer. See the next stage for details. 
 

  • Circled below is a close up of the ribbon cable which is attached to the touch screen/digitizer. This ribbon connects in a different way to the last few and is called a zif connector. The black part is a latch that opens and closes on a hinge. Carefully lift it up, towards the ribbon and the ribbon will be free. Refer to the next stage to see the latch in the open position. The auto rotate sensor and earpiece are indicated by the arrow. Lever this from the point shown to remove it. 
 

  • Below you can see the connector in the open position and the ribbon is now free. The auto rotate sensor and earpiece have now also been removed.


  • Tip the phone over and the home button and gasket for the auto rotate sensor will fall out.


  • To remove the touch screen you first need to heat all the way around the edge of the screen with a hot air gun or hair dryer. Do this for about 60 seconds and the adhesive holding the screen in place will loosen. Next, run something like the edge of a credit card around the very edge (the black part) of the screen. Carefully go all the way around the edge of the screen until it is released. 

  • With the touch screen/digitizer removed, your phone should look like below.

  • Turn the phone over and push the back of the LCD screen from the point shown. This will raise it enough on the other side for you to slide your plastic tool underneath the LCD screen. 


  • Slide your plastic tool under the left side of the LCD screen to release it. Do not apply force and do not lever the screen. 


  • You should now have the LCD screen removed, as shown below. Disassembly is now complete. Reverse the whole procedure for reassembly. 

ဆက္ဖတ္ရန္>>>

Samsung Galaxy S2 I9100 ၿဖဳတ္ နည္း

ၿဖဳတ္ရန္ လိုအပ္ ေသာပစၥည္းမ်ား : Phillips screwdriver, plastic tool such as a guitar plectrum or credit card.

1 . Remove your back cover, battery, sim and memory card. Now remove the seven screws you can see, circled below.




2 . Next, slide something thin and flat all the way round the join of the front cover in an anti clockwise direction, as shown below. This will release the battery compartment.

 

3 . With the battery compartment removed, your phone should look like below. Six ribbon connectors, circled below, need to be disconnected. Each attaches like a plug and socket. Just lever each one up to unplug. On the left and right side of the phone are the power and volume micro switches, indicated by the arrows below. These are permanently connected to the circuit board but are stuck to the side of the housing with double sided tape. Carefully peel them away from the side of the housing, leaving them connected to the circuit board.

4 . Next remove the circled screw and you can then lift the circuit board free.

 

5 . Now peel back the ribbon cable indicated by the arrow. It's held in place with double sided tape. Then remove the two circled screws.




6 . Use your plastic tool to lift the blue circuit board out.



 7 . Below you can see the blue circuit board has been removed. Use your screwdriver to lever the ringer and earpiece from the points indicated by the arrows below. 



8 . With the ringer and earpiece removed your phone should look like below. Another ribbon, indicated by the arrow, needs to be peeled back. It's held in place with double sided tape. The front facing camera, circled below, should be lifted up slightly. To remove the screen you first need to apply some heat to the front of the screen using a hot air gun or hair dryer. Do this for about 60 seconds. Then push your screwdriver into the recess where the front facing camera sits. This will raise the screen slightly from the other side, allowing you to slide your plastic tool under it.


9 .  Run your plastic tool under one side of the screen, indicated by the dashed line. Keep away from the area below the screen or you will damage the home button ribbon cable. Keep applying more heat to the screen and it will start to free.



10 .Now push your plastic tool right under the screen, as shown below. Keep applying more heat and the screen will gradually free.




11 . Lift the screen up, carefully sliding the two ribbons, indicated by the arrows, through the housing.



12 . The screen has now been removed from the frame. The ribbon for the home button and soft key sensors needs to be carefully peeled away from the back of the screen. Apply some heat first.


13 . The ribbon cable has now been removed and the home button itself will simply fall out of the back of the screen, as shown below. Disassembly is now complete. Reverse the whole procedure for reassembly. 




ဆက္ဖတ္ရန္>>>