Sony phone မ်ားကို online ကေန firmware တင္နည္း

ဒီတစ္ခါ SONY ဖုန္းကိုင္ေဆာင္ထားတဲ့ သူငယ္ခ်င္းမ်ား အတြက္ ဘာbox မွသံုးစရာမလိုဘဲ firmware
တင္နည္းကို တင္ၿပပါမယ္ Firmware တင္ဖို ့အတြက္ internet ေတာရွိရပါမယ္ 0nline ကေနတင္မွာ
ၿဖစ္တဲ့အတြက္ မိမိအသံုးၿပဳတဲ့ internet ေပၚမူတည္ၿပီ ၾကာတက္ပါတယ္ Net လိုင္ေကာင္ရင္ေတာ ခဏပါဘဲ ဒီေကာင္က sony phone ေတာေတာမ်ားမ်ားကို firmware တင္လိုရပါတယ္ ကဲfirmware
တင္ၿခင္သူမ်ားေအာက္ကေဒါင္လုပ္လင့္ကေန software ကိုေဒါင္လိုက္ပါ  fireware တင္မဲ့လူမ်ားမိမိဖုန္းနဲ့
သက္ဆိုင္တဲ့ driver မ်ားကို အရင္သြင္းထားပါ ဒါမွ firmware တင္လိုေအာင္ၿမင္ပါမွာ ကဲစလိုက္ရေအာင္


Update firmware service sony mobile

ေဒါင္လို့ရလာတဲ့ software ကို computer မွာသြင္းၿပီဖြင့္လိုက္ပါ ဒီပံုအတိုင္ပါ

ၿပီရင္ ဒီလိုမ်ိဳ တက္လာပါမယ္

ၿပီရင္ေအာက္နာက I hereby accept the.........ေနရာမွာအမွတ္ၿခစ္ၿပီ Start ေနရာမွာႏိွပ္ပါ

ၿပီရင္ကိုယ့္ဖုန္းေမာ္ဒယ္ကို အေပၚနာကအကြက္မွာေရြးပါ ဖုန္းအစံုးပါပါတယ္

ၿပီရင္ သူကဘာခလုတ္ႏိွပ္ၿပီ ဘယ္လို usb ၾကိဳထိုရမွာလဲ ဆိုတာ ၿပမွာပါ သူၿပသလိုမွန္ေအာင္ခ်ိတ္ပါ

ခ်ိတ္ဆက္မူေအာင္ၿမင္တယ္ဆိုရင္ အေပၚဆံုးနာက Confirm ေနရာမွာ အစိမ္ေရာင္အတန္တက္လာပါမယ္ ၿပီရင္ သူဟာသူ firmware တင္သြားပါမယ္
တင္လိုၿပီသြားရင္ Update ေနရာမွာ အစိမ္ေရာင္တန္ၿပည့္သြားရင္ ဖုန္းက reboot
က်ၿပီ ခဏေန boot ၿပန္တက္လာရင္ firmware တင္လို ့ေအာင္ၿမင္ပါၿပီ
(မွတ္ခ်က္ - အင္တာနက္ speed ေကာင္း မွလုပ္ရန္ )
 


post by M F I T

ဆက္ဖတ္ရန္>>>

Custom Rom ေဒါင္းခ်င္သူမ်ားအတြက္

Custom rom ေဒါင္းခ်င္ သူ မ်ား အတြက္ .....
ေဒါင္းခ်င္တာ ႏိုပ္လိုက္ပါ သက္ဆိုင္ရာ  လင္႔ ကို ေရာက္သြားပါမယ္ ။
ပထမ ၁၂လံုးထြက္လာပါမယ္ ။ေအာက္ဆံုးမွာ 显示更多机型  ဒီစာ ေလး ရွိပါတယ္ အဲ႔ ဒါ ႏိုပ္ရင္ devices ေတြ ထပ္ထြက္မယ္ ။

ဆက္ဖတ္ရန္>>>

Sony Android ဖုန္းမ်ား အတြက္ official Firmware စုစည္းမူ

Mobile House မွ မန္ဘာ မ်ား အတြက္ Sony Android ဖုန္း မ်ား ရဲ႕ official Firmware ေတြ ပါ ။ 

အားလံုး အဆင္ေၿပ မယ္ လို႔ ေမ်ာ္လင္႔ ပါတယ္ ....

 

2012 DEVICES

 

 

T	7.0.A.3.195	9.1.A.0.489	reserved
V	9.0.D.0.484	9.1.A.0.490	9.1.A.0.492
Ion	6.1.E.1.20	6.1.E.2.68	6.1.E.3.7
S	6.0.A.3.76	6.1.A.2.45	reserved
J	11.0.A.3.18	11.0.A.7.5	reserved
E (Dual)	11.1.A.0.68	reserved	reserved
Tipo	11.0.A.0.16	11.0.A.4.22	reserved
Tipo (Dual)	11.0.A.6.5	reserved	reserved
Miro	11.0.A.5.5	reserved	reserved
Go	6.0.B.3.184	6.1.1.B.1.54	reserved
Sola	6.0.B.3.184	6.1.1.B.1.54	reserved
P	6.0.B.3.184	6.1.1.B.1.54	6.1.1.B.1.75
U	6.0.B.3.184	6.1.1.B.1.54	reserved
Neo L	4.1.B.0.587	4.1.B.0.626	N/A

 

 

2011 DEVICES

PLAY(GSM)	4.0.2.A.0.62 [zip]	N/A
Arc	4.0.2.A.0.62 [zip]	4.1.B.0.587 [zip]
Arc S	4.0.2.A.0.62 [zip]	4.1.B.0.587 [zip]
Neo	4.0.2.A.0.62 [zip]	4.1.B.0.587
Neo V	4.0.2.A.0.62 [zip]	4.1.B.0.587
Pro	4.0.2.A.0.62 [zip]	4.1.B.0.587
Ray	4.0.2.A.0.62	4.1.B.0.587
Mini	4.0.2.A.0.62 [zip]	4.1.B.0.587
Mini Pro	4.0.2.A.0.62 [zip]	4.1.B.0.587
Active	4.0.2.A.0.62	4.1.B.0.587
Live	4.0.2.A.0.62	4.1.B.0.587

 

2010 DEVICES

 

X10	3.0.1.G.0.75
X10 Mini	2.1.1.C.0.0
X10 Mini Pro	2.1.1.C.0.0
X8	2.1.1.C.0.0

ဆက္ဖတ္ရန္>>>

Sony Xperia X10 အတြက္ android 4.1 Jelly Bean

 Unofficial CyanogenMod

Main issues:

• HotSpot
• CamCorder
• Native Camera Glitches in display

Working

• Gallery (only pictures)
• Airplane mode (When leaving airplane mode, it asks for sim code. Just click on reject button)
• halt and reboot
• Bluetooth
• GSM/Data
• Wifi
• Default Camera with glitches

Speed will be increased if you use Wuala Client instead of web download. Registration is free.

http://www.wuala.com/CMX10/Android/

gapps

ဆက္ဖတ္ရန္>>>

Sony Xperia T ( LT30 )Firmware + Root လုပ္နည္း

1. ROM download
- Firmware ကို ဒီမွာ ေဒါင္းပါ  - https://docs.google.com/open?id=0B_d...ll1MDhWMGlYSmc
- Flashtool latest ဗားရွင္း အသံုး ၿပဳၿပီး ေရးပါ ။
- ROM is very clean and without any Bloatware

2. changelog
- now we can download new small apps (check attachment for it)
- new media apps (Walkman, album etc), same as this - http://forum.xda-developers.com/show....php?t=1938222

3. root လုပ္ရန္

- boorloader unlock  အရင္ လုပ္ လိုက္ပါ ။
- ၿပီး၇င္ ဒီ kernel ႏွင္႔ ၿပန္ေရးပါ - http://forum.xda-developers.com/show....php?t=1922925
- download superuser zip here - https://rapidshare.com/files/3415386...arm-signed.zip)
- ဖုန္းရဲ႕  internal memory ထဲ ကို superuser zip ကိုကူးထည္႕ ပါ ။
- Recovery ထဲ က ေန install လုပ္လိုက္ ပါ ,
  root ရသြားပါၿပီ ။

ဆက္ဖတ္ရန္>>>

Update Xperia Arc to Paranoid Jelly Bean 4.1.1 Custom ROM

How to Update Xperia Arc to Paranoid Jelly Bean 4.1.1Custom ROM

1. On your PC download the update and the Google apps by using the below links.
2. For the custom ROM the download link is here.
3. The Google Apps can be downloaded from here.
4. Then, take the USB cord and by using it connect your device with the computer.
5. Select the downloaded files and copy them to your handset.
6. Remove the USB cable for disconnecting the device.
7. Turn the Arc off.
8. Then reboot in recovery.
9. To enter in recovery press and hold the Volume Down button while powering on the phone.
10. From recovery you must choose to wipe the system; for this select “wipe data factory reset” and “wipe cache partition”.
11. Next, return to the recovery menu by selecting “+++go back+++”.
12. For flashing the update select “install zip from sd card” and “choose zip from sd card”.
13. Pick the update file first, install it and then do the same for applying the Google apps package.
14. Don’t make any other changes just wait until the process ends.
15. Finally, select “+++go back+++” and then “reboot system now”.

Well, that’s all guys as your Sony Xperia Arc is now running the latest Android OS, the Jelly Bean 4.1.1 platform. All this was possible thanks to the Paranoid custom ROM firmware which was successfully installed on your smartphone. If there were problems with the steps or with the pre requisites, share the issues with us by using the comments area from below and we will try to help you out. Stay close for further how to guides as we are updating you daily.

ဆက္ဖတ္ရန္>>>

Update Sony Xperia Acro S to CM 10 Jelly Bean 4.1.1 Custom ROM

• Remember to backup the data.
• Also, root and install a custom recovery image on your phone.
• Then, ensure that you can use a computer, the Acro S and its USB cord.
• On the computer and phone deactivate the Firewall and antivirus protection. Also, uninstall any other security tool.
• On the smartphone enable the USB debugging option; go here and check the last option: “Settings -> Applications -> Development -> USB debugging”.
• Check the battery status. If there is at least 70% power then you can skip this line; if not go and charge the battery first.
• Download the Acro S drivers from here and install them to your computer.
• Don’t apply this tutorial on similar devices with the Xperia Acro S as you can brick them.

How to Update Sony Xperia Acro S to CM 10 Jelly Bean 4.1.1 Custom ROM

1. On your computer download the CM 10 file (download link here) and the Google Apps from here.
2. Then, connect the phone with the PC.
3. Use the USB cord for that.
4. Select and then copy the downloaded files from the computer to the handset.
5. Disconnect the Acro from the PC by removing the USB cord.
6. Turn off the smartphone.
7. Enter it in recovery.
8. The recovery mode can be reached by pressing on the Volume Up button while powering the phone on.
9. Once in recovery choose the wipe options: “wipe data factory reset” and “wipe cache partition”.
10. Then select “+++go back+++” and return to the main menu.
11. Up next select “install zip from sd card” followed by “choose zip from sd card”.
12. Pick the CM 10 file and install it; then do the same for flashing the Google apps package.
13. Don’t make any other changes in recovery.
14. When the installation process ends, select “+++go back+++” followed by “reboot system now”.
15. Done.

That was all; you now know how to update the Sony Xperia Acro S to CM 10 Jelly Bean 4.1.1. Stay close as we will bring a suitable root tutorial for the new OS. Also, do tell us how things worked for you or if you have encountered issues during the steps from above. Test the ROM and see how it performs on your device. If there are bugs or things that aren’t working share the same with us and with other users by using the comments area from below.

ဆက္ဖတ္ရန္>>>

Install Official Android 4.0.4 ICS Update Sony XPERIA Ray ST18A/I

Sony Xperia Ray ST18a/I was shipped with Android Gingerbread on a 1GHz Qualcomm snapdragon processor paired with Adreno 205 GPU. Every Xperia Ray user is looking for Android 4.0.4 ICS firmware update and they can get it now officially. But Sony didn’t release the Official update via over the air (OTA). Users must download the rom package from official site and install the Android 4.0.4 ICS firmware update manually through flash tools on their Sony XPERIA Ray ST18A/I devices. We are providing detailed tutorial and Firmware package that will guide you to installed latest ICS update on Xperia Ray. The latest Official Android ICS was dubbed with FW 4.1.B.0.431 firmware version and this update has many bug fixes and also added new features. Sony has also tried to resolve the battery drainage problem, enhanced other features and solved Wi-Fi disconnection issues.

Are you confused with what is ST18A/I? well here is your answer Sony has released two different models Xperia ST18A and ST18I both having same specification and features. But Xperia ST18i was international model and ST18A was american version.

Sony Xperia Ray users already tasted with Android 4.0.3 ics update but they didn’t like it because it created a lot of problems. The device becomes very hot although we use it normally; frequent WI-FI disconnections, battery draining and sometimes the phone runs very slow and lagging.

So Sony has promised that they are going to release another update with the name of android 4.0.4 ics in order to fix all those issues.

Here New improvements from Android 4.0.3 to 4.0.4 ICS

• Battery life seems to keep getting better.
• Wi-Fi connection speed was increased and stability has been perfected.
• Scrolling is very smooth, although we use live wallpapers running at the background.
• Homescreen transition became smooth and faster response.
• Phone Dialer UI improved a little bit.
• New “DOCK” with a lot of multiple settings.
• RAM was adjusting automatically based on demanding of apps usage and also more free internal memory space.
• Faster and smoother camera.
• Screen rotation is pretty fast.

Warning: On following this article you will root your device which voids warranty. The only way with which you re-claim the warranty is by re-applying the official update of ICS 4.0.4 firmware. Therefore, proceed at your own risk.

Pre-Requisites:

1. This article is only for the users who own original Sony Xperia RAY ST18A/I. Trying the methods and steps mentioned in this article on any other device or any other model of Sony can damage the device.

2. If your device is on the Gingerbread or ICS 4.0.3 firmware then this rooting process will not work as there are different procedures of rooting across different firmware’s. You can check your current firmware from the path “Settings > About phone” where it should show the current firmware as ICS 4.0.4 firmware.

3. You should ensure that there is at least 70% charge with your device, so that there will be no Power interruption during the process.

4. Backup all essential data’s on your phone like sms, contacts, call log and APN usernames, to assure that there will be no data loss during the process.

5. Disable all Security programs like Firewall and Antivirus from your computer and uninstall the same from your phone, as these security programs generally tend to interrupt the process.

6. Enable USB Debugging in your Sony Xperia RAY from the path “Settings > Applications > Development > USB debugging”. The option of USB Debugging should be ticked.

Instructions, Steps and Procedure to Update Sony XPERIA Ray ST18A/I to Official Android 4.0.4 ICS Firmware:

1. Download Flashtool for flashing the software on all sony devices. Get it from Here to your PC. The size of the file was 129 MB.

2. Install the flashtool application on the PC. In C drive you can see flashtool folder. Open the folder then you will get fives sub folders like this Custom, Drivers, Firmwares, Loaders and X10Flasher_lib.

3. Again you need to download one more file. It will update the flashtool software in windows from version v0.8.0.0 to v0.8.6.0. Once you installed this little update the application will run perfect without any problems.  From Here

4. Now download Android 4.0.4 ICS firmware zip package file for Sony Xperia Ray ST18a/I from Here to your PC. (file name ST18i_4.1.B.0.431_tw will be 197 MB).

5. Extract the firmware zip file then you will get ST18i_4.1.B.0.431_tw.ftf file.

6 Go to C: / Drive > flashtool > firmwares > delete everything present and Copy the firmware package ST18i_4.1.B.0.431_tw.ftf file to the current firmwares folder.

7. Now run the flashtool application. A medium sized window will be opened there you can able to see multiple options.

8. Click on flash icon. It will ask you to connect your phone on Flashmode. For that you need to turn off your phone, press and hold both back and Volume buttons together, then connect the USB Cable. Press OK and select the xperia ray device in the list.

9. Now you can see the 4.1.B.0.431 firmware version of your Xperia Ray ST18i device which we are going to flash it.

10. On right side of the window you need to select these options wipe data, wipe cache, wipe apps log and No final verification.

11. Click Ok to proceed. You will get message on the window like this preparing files for flashing.

12. Again it will ask you disconnect your device from PC and turn it off. Now power on the device, by press the back button and hold it. Plug the USB cable to the PC.

14. In flashtool window the flashing process will start and it will take some time to finish the process. You must have little patience while process is going.

15. When the flashing process has completed, reboot your phone, it may not start completely, may remain at Sony logo or remain blank/black. So, don’t be panic just be patient.

Note: If any point of time just in case you get stuck any anywhere, just re-insert the battery and follow the steps from the beginning.

That’s it, you have successfully install Official Android 4.0.4 ICS update your Sony Xperia RAY. Let us know how you will feel or have any queries, we are committed to help you in all possible ways.

ဆက္ဖတ္ရန္>>>

FlashTool သြင္းနည္း နဲ႔ သံုးနည္း

 You are following these tutorials at your own risk, we do not take any responsibility for errors warning

Flashtool is a flashing software that can be used to : Flash original Images (Android 1.6, 2.1, 2.3 Images) Root your phone Install Recovery, Busybox, custom kernels Clean your Rom (remove /system/apps apps of your choice) (Be careful, unless you really know what you do, do not modify the default list. This can make your phone stuck at the SE Logo) Clear dalvik cache Optimize (install of JIT v2) (Disabled in 0.4, will readd it as a plugin for 2.1 phones only) Customize (installs apps found in the custom/apps folder of the flashtool) Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step) Edit any text file on the device Rebrand your device
Screenshot

How to install, use and flash stock software + more with flashtool

Download the latest version of flashtool here 

http://hotfile.com/dl/156992153/90fbd2d/flashtool-0.8.0.0-windows.exe.html

 

 http://uploaded.to/file/pgroxgfl

 

Flashtool is a pc program a bit like sonys pc updater except you can flash with abit more choice. you can use this program for flashing any stock offical sony ericsson software (FTF named files direct from sony ericsson offical flashing computer code named EMMA ) to all the 2011 sony ericsson range and some of Sonys 2012 range devices providing its the right software for the right device to do this your phone does not need to be unlocked in any way. It also enables you to flash any including previous versions of sony software over the version you have, you can flash these over custom roms too.

You are following these tutorials at your own risk, we do not take any responsibility for errors warning

Things you can do with this program

flashmode

1) flash any sony ericsson firmware (FTF files)
2) flash sony ericsson offical kernals (SIN files) without flashing hole firmware
3) flash different basebands (FTF files)
4) install different system apps along with firmware's
5) auto root your device
6) unbrick your device ( depends on the state of your handset damage )
7) relock your bootloaders
8) and more

fastboot mode

1) flash custom kernals (boot.IMG files)
2) flash system images (system.IMG files)
3) and more

installation of flashtool

Windows version :
1. Install the full install Flashtool latest package
2. Apply the latest update (each update is cumulative)
   Updates will not install if full latest package is not installed

Linux version :
1. Unpack the tar.7z package
2. Check that libusb-1.0 is installed. On 64bits system, both 64bit and 32bit should be installed.
3. Add these rules to /etc/udev :
   SUBSYSTEM=="usb", ACTION=="add", SYSFS{idVendor}=="0fce", SYSFS{idProduct}=="*", MODE="0777"

ဆက္ဖတ္ရန္>>>

W8 Walkman Android 2.3.7 v019 GingerDX သို႕ update လုပ္ရေအာင္။

W8 Walkman Android 2.3.7 v019 GingerDX သို႕ update လုပ္ရေအာင္။

Xperia Active Launcher
Download Link :
http://www.multiupload.com/RCI41IWU1A

Tutorial How To Root W8 To Android 2.3 GingerDX

Download These File First 

:http://www.4shared.com/file/zvI0Lv2q/SuperOneClickv191-ShortFuse.html
http://www.4shared.com/file/3BuwWfWr/xRecovery01.html
http://www.4shared.com/file/XdtGx9oo/Root_Explorer_v216.html

GingerDX ROM
http://www.multiupload.com/BNMY1G8RV1

Just Follow This Step

Step 1: Root your W8
- download and unzip SuperOneClickv1.9.1-ShortFuse to PC Desktop
- connect W8 to PC (Do not mount)
- on your phone [goto] [setting] [applications] select [unknown sources]
- on your phone [goto] [setting] [applications] [development] select [usb debugging]
- Launch SuperOneClick, click [Root]
- If it ask something about Busy Box just click Yes
- you will see - [not successful - is your phone software higher than 2.0?]
- click [yes] and then [success] & [test su] message
(this last part might not appear the same as It's written here, so just use your common sense to get through)

If you are successful in ROOTING your phone - SuperUser app will be installed to your W8.
If you are not successful:-
(a) check your PC [devices] [usb] to see if your phone is recognized by your PC (troubleshoot PC driver problem)
(b) [usb debugging] in your W8 phone settings enabled?
Then [Launch] [SuperOneClick] and try again.

Install any File Manager from Android Market, such as Astro File Manager.


Step 2: Mount W8 (to access SD Card)
- copy [Root.Explorer.v2.16.apk] to root of SD Card
- using PC create folder [xRecovery] and unzip xRecovery0.1.rar
- put the 3 files into the xRecovery folder you've created
- copy the xRecovery folder to root of SD Card


Step 3: UnMount W8 from PC


Step 4: Launch [Astro File Manager] Install [Root Explorer v2.16.apk]


Step 5:
- Launch [Root Explorer]
- scroll down to /sdcard [click to access]
- scroll down to xRecovery folder [click to access]
- Select each of the 3 files (one by one) [click & hold] [copy]
- [click] parent folder (twice)
- scroll down to [click to access] [system]
- [click to access] [bin] and [click] [Mount R/W] (R/W as in Read/Write)
- press [paste] button

Now your Phone should be rooted and ready to install your Android 2.3.7




Step 1: Make a backup copy of your Android Eclair 2.1 using xRecovery
- check that your phone's SD Card has at least 650MB of free space
[SD card free space is to hold both your phone original backup ROM and the 2.3 ROM]
- shutdown your W8 and wait 5 seconds and then [reboot] your phone.
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- select [backup and restore] [backup] from the menu

NOTE:
- This will create a backup file in your SD Card [SD/xRecovery/backup]
- After you have completed the backup using xRecovery, it will return to the menu screen.
- Now choose [reboot] - your W8 phone should restart


Step 2: Download GingerXperia ROM (something you probably already did with the links above)
- [mount] your W8 and copy this file [GingerDX.zip] into SD card
- [unmount] and shutdown your W8

Step 3: Installing the 2.3.7 ROM on your W8
- [boot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [install custom zip]
- select [GingerDX.zip] from your SD card & hit [yes]
- xRecovery will start to install the 2.3.7 ROM on your phone.
- when it is done, xRecovey will go back to the startup menu
- [click] [reboot]

If you are stuck in the GingerDX startup screen for more than 5 minutes, just try restart the phone and It should be fine. Took me 2 restarts before the new ROM took action.

 

ဒီအဆင့္က 2.3.7 ကိုသင္မၾကိဳက္ရင္ အရင္ Official Rom ကိုျပန္ခ်ိန္းႏိုင္ရန္အတြက္ပါ။
RESTORING THE Official Android Eclair 2.1.1 ROM

- [shutdown] wait 5 seconds [reboot] W8
- when you see the words [Sony Ericsson] on the phone screen, start pressing the back button on your phone multiple times and you will enter the xRecovery Menu.
- [select] [factory reset (full wipe)]
- scroll down and hit [backup/restore] [restore]
- you should see your original 2.1 backup ROM
- [select] [2011-10-xx.xx.xx.xx.ROM] [restore] [it should look something like 2011-05-06.21.01.23]
- xRecovery will start to install the original 2.1.1 ROM [the ROM you've backed up in Step 1] from your phone's SD Card.
- when it is done xRecovey will go back to the startup menu
- [click] [reboot]

100% အဆင္ေျပပါတယ္။ကြ်န္ေတာ္ကိုယ္တိုင္ စမ္းပီးမွတင္ေပးလိုက္တာပါ။လံုး၀ၾကိဳက္ႏွစ္သက္က်ပါလိမ့္မယ္။


ၤFirmware update လုပ္ျပီးသြားရင္ေတာ့ ကြ်န္ေတာ္တို႕ Multitouch စနစ္ ကိုထည္႕သြင္းရေအာင္

အရင္ဆံုးေအာက္က ax8mt.ko ဖိုင္ကိုေဒါင္းေလာ့ရယူပါ။ျပီးရင္ အဆင့္ေလးေတြအတိုင္း လုပ္သြားပါ။ပီးတာနဲ႕ ဖုန္းကို ပါ၀ါပိတ္ပီး ျပန္ဖြင့္လိုက္ပါ။Multitouch စနစ္လုပ္တာေအာင္ျမင္သြားပါပီ။

Download Link ax8mt.ko
http://www.mediafire.com/?ox2h7e3o8pphamf

1) Copy ax8mt.ko to sdcard
2) Open the root explorer
3) Go to sdcard and then move ax8mt.ko to system/lib/modules
4) Before your paste make sure your tap Mount/Ro and then paste
5) Quit root explorer
6) Open Terminal Emulator
7) Type su
8) Type insmod /system/lib/modules/ax8mt.ko
9) Type dmesg

Enjoy your Multitouch :)

ရဲလင္းေအာင္
kgk.remix@gmail.com

ဆက္ဖတ္ရန္>>>

How to install Froyo (Android 2.2) into Xperia X8

How to install Froyo (Android 2.2) into Xperia X8 in Sony Ericsson xperia X8

People keep asking how to get the Froyo or other custom ROM to Xperia X8 and we keep telling them that it is not official way and you can loose your warranty. Anyway, here is step by step tutorial  for installing Android 2.2 (Froyo) ROM on Sony Ericsson XPERIA X8 Phone. The phone used to come with Android v1.6 but later Sony started giving users upgrade to Android v2.1. But here we will teach you how to install “Android Froyo’s custom ROM” on your XPERIA X8.

One more thing: Keep in mind, however, it is highly recommended to carefully consider whether or not it is worth the risk to damaging the phone. If not done correctly, consequences may occur, such as damage to the phone. We are not responsible for any damage caused to your device by this tutorial. Follow this tutorial at your own risk.

For the installation of Froyo on X8, you need to download Froyo’s Custom ROM on your PC. Make sure that your X8 is rooted and WinRAR is installed in your computer. It will be required for the extraction of the Custom ROM.  Install the xrecovery software on your X8.
Before beginning the installation of Froyo we advise you to make backup of your phone, because this is a vital process and anything can happen in between.
How to backup your phone:

1. Switch off you phone and wait for 5 seconds.
2. Switch on the phone and as the Sony Ericsson Screen flashes press the back key multiple times. This will take you to the xrecovery menu.
3. In the menu select the option Backup and Restore and then select backup in the next menu.
4. This will create backup of your phone in a folder inside the SD card in the backup folder inside the xrecovery folder in the SD card
5. Keep a copy of that folder in your hard drive.

When you have backed up your phone then you are all set to begin the installation of “Android Froyo’s Custom ROM”. Follow the steps for installation of Froyo on your phone.

1. Create a new folder on your desktop and rename it as per your choice. Here let’s consider that folder’s name is “XYZ”
2. Now move the downloaded “Android Froyo Custom ROM” to the “XYZ” folder.
3. The Custom ROM is a RAR archive so you need to extract it using WinRAR.
4. For extracting the Custom Rom just Right Click on the file and then click on “Extract Here”
5. It will get extracted and “Android Froyo Custom ROM’s” folder will be created.
6. Now connect your Sony Ericsson XPERIA X8 Phone with your PC via USB cable.
7. Select “Open Folder to view files” in the Autoplay box and then click on OK.
8. Now Go To backup folder present inside the xrecovery folder (xrecovery – > backup)
9. Copy “Android Froyo Custom ROM’s” folder to backup folder from “XYZ” folder.
10. When it’s done, disconnect your phone from your PC.
11. Switch/Power off your phone and wait for five seconds.
12. Now Switch/Power on your phone again and as soon as the Sony Ericsson logo flashes on the screen start pressing the back key continuously.
13. This will take you to the Xrecovery menu.  (This happens only when you have installed xrecovery on your phone.)
14. Now Select “Backup and Restore” in the Xrecovery menu
15. In “Backup and Restore” click on Restore.
16. Now you will see two files
    1. The backup of your phone
    2. “Android Froyo Custom ROM” file
17. Select the “Android Froyo Custom ROM” file .
18. It will Ask “Are You Sure”. Select “Yes – Restore”
19. Now it will start installing “Android Froyo” on your XPERIA X8. Be patient, it will take some amount of time.
20. After five or six minutes installation gets completed and a menu comes in front of you. Select “Reboot” From That Menu and Press Enter.
21. Your Phone will reboot and you will see the change.  That’s it! Android Froyo get’s installed on your phone. Enjoy.

So in this way you can install Android v2.2 (Froyo) on your XPERIA X8 phone. By this method you can install any custom ROM on your X8.
Files you need to download:  (Click to get redirected to the download page).

• Android 2.2 Froyo Custom ROM
• xRecovery 0.1

ဆက္ဖတ္ရန္>>>