MT6575 flashing tutorial

MT6575 flashing tutorial

Now that the new MediaTek chipset has been released, it is time to publish the instructions on how to flash your MT6575 based phone. Please note that the images shown on this tutorial are just examples and that you must flash your phone with the correct ROM files.

Make sure that you read everything carefully and know what you are doing. Don't blame me for any damage that may occur on your phone.

What's needed:

• USB data cable
• MediaTek USB VCOM drivers 
• SP Flash Tool (v3.1206.01 or higher)

And now the tutorial...

• First of all, make sure that you install the MT6575 USB VCOM drivers.

Flashing the whole ROM

• Open up SP Flash Tool, load the correct scatter file (MT6575_Android_scatter_emmc.txt) for your device and ignore any message that may appear.

• Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
• Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.

•  After the red progress bar is complete, there will appear a purple progress bar.

• Right after the purple progress bar is complete, a message will appear underneath it: “Please insert USB cable in x seconds” and the download will start right away (you will see the yellow progress bar filling up).

• When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.

• You can now safely disconnect your phone and turn it on.

Flashing only part of the ROM

• In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed. Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button).

• The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.

• The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.

• Please note that, even though it isn't mandatory to select it on the list of images to flash, preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.

Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.

ဆက္ဖတ္ရန္>>>

How to root the Lenovo Ideapad A1

2.3 (Gingerbread) 

Root method
Super One Click

ဆက္ဖတ္ရန္>>>

Galaxy Tab 2 10.1 Model GT-P5113, GT-P5110 or GT-P5100 root လုပ္နည္း

 4.03 အတြက္ပါ
လိုတာေတြ ေအာက္မွာေဒါင္း ပါ:
1. Odin3-v1.85_3.zip
2.ClockworkMod Recovery Version 5.5.0.4:
For P5100
For GT-P5110
For GT-P5113
3. CWM Root for Tab2 10.1 .zip
For GT-P5100 or GT-P5110
For GT-P5113
4. Samsung KIES မသြင္းထားရင္,ကြန္ၿပဳတာ နဲ႔ မခ်ိ္တ္ခင္ Samsung USB Drivers အရင္သြင္းပါ။

IMPORTANT: Copy cwm-root-gtab2.zip (or cwm-root-gtab2a.zip) to the ROOT of your external sdcard ( /mnt/extSdCard ). This is the micro sdcard you insert in tablet slot. Your /mnt/sdcard folder is internal memory (not recognized in CWM recovery).

To avoid confusion about using the Volume rocker switch, I'll refer to side closest to POWER button as LEFT/Volume DOWN and side away from power switch as RIGHT/VolumeUP.

STEP 1:
Turn tablet OFF and restart in download mode by pushing and holding Power & Volume UP/RIGHT buttons at same time. When wording with yellow triangle appears, push Volume down to continue into download (ODIN) mode. Don't plug tablet into computer yet.

STEP 2:
  Samsung KIES သြင္း ထားရင္ လံုး၀ ပိတ္ထား ပါ ။
Extract Odin3 v1.85.exe and run it.

STEP 3:
tablet နဲ႕ ကြန္ၿပဴတာခ်ိတ္ပါ ။
In Odin, click PDA button. Select GT-P51??_ClockworkMod-Recovery_5.5.0.4.tar file you downloaded and click START button.
Let Odin install files. When it's done installing CWM, box turns GREEN and tablet will reboot.

STEP 4:
Disconnect tablet from computer. Turn tablet OFF and restart in recovery (CWM) by pushing and holding Power & Volume DOWN/LEFT buttons at same time. When Samsung Tab 2 10.1 logo appears, you can release power button but continue holding volume button for a few more seconds. Note: If you've done this on other Samsung devices, you will notice that it takes longer before blue CWM v5.5.0.4 text appears ... just be patient.

Once you are in recovery, use volume button (UP/DOWN/LEFT OR RIGHT) to move around and POWER button to select an option.
Select install zip from sdcard. Choose cwm-root-gtab2.zip (or cwm-root-gtab2a.zip) file you already copied to root of sdcard.

When rooting is finished, choose reboot system now from CWM menu.

DONE !

ဆက္ဖတ္ရန္>>>

HTC Wildfire S root လုပ္ နည္း & ၿမန္မာေဖာင္႔

 

 

 Step 1: Flashing the Custom Recovery UI by XDA.cn

1. ဖုန္းကို S-OFF လုပ္ထားလား ေသခ်ာစစ္ပါ .
2. memory card ကို FAT32 format ရိုက္ထား ပါ.
3. SD card ထဲကို PG76IMG.zip ဖိုင္ကူးထည္႕ပါ .
4. ဖုန္း settings ထဲက Fast Boot ပိတ္ပါ (Settings > Power > Disable Fastboot)
5. ဖုန္းပါ၀ါ ပိတ္လိုက္ပါ ။
6.  "power" နဲ႔ "volume down" ခလုပ္ ကို ဖိထား ပါ ။ HBOOT တက္လာပါမယ္။
7. ဘာမွမလုပ္ ပဲ ေစာင္႔ ေနပါ .Update လုပ္မလား ေမးလာရင္  OK (volume up) to start the flashing process ဆို ေပၚလာရင္ vol upႏိုပ္ ေပး လိုက္ပါ။
8. အားလံုး ၿပီးရင္ ဖုန္း ကို ပိတ္လိုက္ပါ ။
9. Let Android boot and delete the PG76IMG.zip file from your SD card via USB.
10. Congrats! Custom recovery has been installed. Process to step 2.

root မလုပ္ပဲ ၿမန္မာ ေဖာင္႔ ထည္႔ မယ္ဆို ဒီဖိုင္ HTC_Font_By_Mobile_House.zip ေဒါင္းၿပီး sd ထဲ ထည္႔ ပါ ။ၿပီးရင္ ေအာက္ က အတိုင္း ဆက္သြား ၿပီး root.zip ထည္႔ ပဲ HTC_Font_By_Mobile_House.zip ကို ေရြး ေပးလိုက္ ပါ ။

Step 2: Flashing the rooting script by XDA.cn

1. SD card ထဲကို root.zip ဖိုင္ကူးထည္႕ပါ . 
2. ဖုန္းပါ၀ါ ပိတ္လိုက္ပါ ။
3. "power" နဲ႔ "volume down" ခလုပ္ ကို ဖိထား ပါ ။ HBOOT တက္လာပါမယ္။  "RECOVERY" ထဲထပ္၀င္လိုက္ ပါ ။
4. recovery ထဲေရာက္ရင္ "install zip from sd card" ကိုေရြးပါ.
5. ၿပီးေတာ႔ "choose zip from sd card" .
6. ၿပီးေတာ႔ ထည္႔ထားတဲ႔ "root.zip"ဖိုင္ကို ေရြး ပါ။
7. "YES".
8.  "Install from sd card completed" လို႕ တက္လာတာေတြ႕ ရမယ္.
9. ၿပီးရင္ ဖုန္း ကို ပိတ္လိုက္ပါ ။
10. ၿပီးရင္ ၿပန္ဖြင္႔ လိုက္ ရသြားၿပီ ။

	PG76IMG.zip
	root.zip

ဆက္ဖတ္ရန္>>>

Galaxy Mini 2 S6500/6500D root လုပ္ နည္း

WARNING: FLASH AT YOUR OWN RISK.THIS METHOD VOIDS WARRANTY!

 clockWorkMod 5.0.2.8
ဒီမွာေဒါင္းပါ  > http://www.mediafire.com/?glxtn92tqd3hgh7
ဒီမွာ Odin3 ေဒါင္း ပါ ။

CWM ေရးမယ္:
ဖုန္း ပါ၀ါ ပိတ္ ။ vol -  and home and power
Vol up to Continue ။ download mode ထဲ ေရာက္ မယ္ ။

ဆက္ ဖတ္ ဖို႕ read more ကို ႏိုပ္ ပါ ။

ဆက္ဖတ္ရန္>>>

SE Xperia Arc bootloader unlocked

1. Download:
-fastboot package: www.multiupload.com/BMJ24IL6XY
-32/64bit drivers: www.multiupload.com/0XZV1LXRVA
2. Go to: unlockbootloader.sonyericsson.com/instructions
3. At the bottom click 'Continue' and enter your IMEI (type *#06# to find out), name and email address
4. You should now receive your unique unlock key
5. Extract fastboot.rar and open fastboot folder
6. Hold SHIFT and right click on the background of the folder
7. Select 'Open command window here'
8. Connect your phone in fastboot mode (turn phone off, hold menu button and plug in USB Cable)
9. In the cmd windows type in fastboot.exe -i 0x0fce getvar version
10. If a value is returned, it means the phone is correctly connected
11. Type in fastboot.exe -i 0x0fce oem unlock 0xKEY and replace KEY with the key provided in step 4.
12. You're device should now be bootloader unlocked

ဆက္ဖတ္ရန္>>>