Mobile House မန္ဘာ မ်ား ေက်းဇူး ၿပဳ ၿပီး www.mobilehouse.co.nr မွ တိုက္ ရိုက္ ၀င္ေပး ပါ ရန္ ႏွင္႔ အသစ္ တင္ သမွ် ကို သိရွိ ေစရန္
https://www.facebook.com/MobileHouseServiceCentre
မွာ Like လုပ္ ေပး ၾက ပါ ....

Wednesday, April 3, 2013

iTunes Error ေတြ နဲ႔ ေၿဖရွင္း နည္း စုစည္း မႈ

Error ေတြ နဲ႔ ေၿဖရွင္း နည္း စုစည္း မႈ !====================================
 Error ေတြ က မ်ား ေတာ႔  ဘာသာ မၿပန္ေပး ႏိုင္ေတာ႔ ဘူး ။ နားလည္ၾက မယ္ လို႔ ေမ်ာ္လင္႔ မိပါတယ္ ။
Here is a list of iTunes errors that could appear during a restore via USB cable.

Error 1

Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.

Error -1
Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use FixRecovery to kick it out of recovery mode.

Error 2
Sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7 or PwnageTool. Device isn't bootable.

Error 6

Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.

Error 9
Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
Rebooting your PC may resolve this issue. Aslo it can be connection issue.

Error 10
LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.

Error 11

Removed bbfw file in the firmware folder of an unzipped IPSW.

Error 13

Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
Error 13 may also signify a USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 14

Custom firmware update fail (PwnageTool). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.

Error 17

Custom firmware update fail (sn0wbreeze). You have to restore the device with a custom firmware. Update to a custom firmware isn't working.

Error 18
This occurs when the media library on the device is corrupt and cannot be modified or updated. Updating to the latest version of iTunes and then restoring should resolve this issue.

Error 20

Reportedly happens during failed downgrade attempts, Some have seen success afterwards by doing the downgrade from DFU mode instead of the normal Recovery mode.

ဆက္ဖတ္ရန္>>>

Huawei official Firmware တင္နည္း

             Huawei official Firmware တင္နည္း

                               http://www.mobilehouse.co.nr


**Firmware တင္နည္း **

၁ = Firmware ေဒါင္းပါ ။

၂ = SD card ကို FAT32 နဲ႔
Format ရိုက္ပါ

၃ = "dload" ဆိုၿပီး Folder သစ္ တစ္ခု SD card ထဲ  ထည္႕ပါ ။

၄ = ေဒါင္း ထားတဲ႔ Firmware ၿဖည္ လိုက္ရင္ အထဲ မွ UPDATE.APP ဖိုင္ပါပါတယ္ ။အဲ႔ ဖိုင္ကို sd card ထဲ က "dload"  Folder ထဲ ကူး ထည္႔ ပါ ။

၅ = ဖုန္းပါ၀ါ ပိတ္ ပါ ။ sd card ထည္႕ ပါ ။

၆ = POWER+RED BUTTON+VOLUME UP(red key ပါတဲ႔ဖုန္း) သို႔ မဟုတ္ Vol + and vol - and power တြဲ ႏိုပ္ပါ ။ step 1 ဆို ၿပီး စတင္ ပါမယ္ ။

၈ = အားလံုး ၿပီး ရင္ reboot က် ၿပီး ၿပန္တက္ လာ ရင္ နည္းနည္း ၾကာပါတယ္ ။ အားလံုးၿပီး ပါၿပီ ။

အခ်ိဳ႕ ဖုန္း မ်ား သည္ update.zip ဖိုင္ နဲ႔ ေပး တက္သည္ ။ထို သို႔ ေပးပါက vol+ and power ကို ဖိ ထား ၿပီး recovery ေခၚ ၿပီး apply from update.zip က သြင္း ရပါတယ္ ။

 
Warning !!!

Data ေတြ အကုန္ ကူး ထားပါ ။အကုန္ ပ်က္ သည္ ။ တစ္ခုခု မွား လုပ္မိပါက ဖုန္းပ်က္တက္သည္ ။

               


Huawei Drivers

Download
ဆက္ဖတ္ရန္>>>

Sony Xperia Tipo ST21i Root လုပ္နည္း

Root the Sony Xperia Tipo ST21i

Downloading Required Files:

III. Rooting the Sony Xperia Tipo ST21i:

၁.ေဒါင္းထားတဲ႔ ဖိုင္ ကို တစ္ေန ရာ မွာ ၿဖည္ပါ ။
၂. USB debugging ကိုအမွန္ၿခစ္ပါ ။ Menu>>Settings>>Developer options>>USB debugging.
၃. ဖုန္း ဖြင္႔ ၿပီး ကြန္ၿပဴတာ နဲ႔ ခ်ိတ္ ပါ ။
၄. ၿဖည္ ထား တဲ႔ folder ထဲ က RunMe.bat ကို ဖြင္႔ ပါ ။
၅. Normal mode ကို ေရြးပါ ။

သူဘာ သူ ဆက္ လုပ္ သြားပါ မယ္ အား လံုး ၿပီးရင္ Root ရပါ ၿပီ ။

မွတ္ခ်က္ အခ်ိဳ႕ ဖုန္း မ်ား တြင္ မရ ပါ ။


ဆက္ဖတ္ရန္>>>