HUAWEI ASCEND Y200 Root လုပ္နည္း

HUAWEI ASCEND Y200

 

သတိ တစ္ခုခု ၿဖစ္လွ်င္ ၿပဳလုပ္သူ တာ၀န္ သာၿဖစ္ သည္ !  
ဒီနည္း ကို မယံုၾကည္ ဘူး ဆို လွ်င္ တ ၿခား နည္း ထြက္တဲ႔ အထိ ေစာင္႔ လိုက္ပါ ။ 

ေတာင္းထား တဲ႔ သူေတြ မ်ား လို႔ တင္ေပးလိုက္ပါတယ္ ။


Chapter I - Preparation 
              Driver အရင္ သိေအာင္ လုပ္ ရပါမယ္ ။

• Put the phone when switched on to the computer.

• 
  It appears a new CD drive, where a folder "drivers" in it. Please install the driver
  
  Code:

  CD-ROM: \ drivers \ adb_driver

• Go to the Phone Settings -> Apps.
• Disable Quick Launch
• Go into the sub-punk Development and Enable USB debugging
• Charging you down root_v5.2.zip and extract it to a folder on your PC
• invite you superuser -3.0.7-signed.zip EFGHI-down grab the zip file on your SD (not unzip) card

Chapter II - CWM install

• Turn off the Y200.
• Hold [Power] + [Volume Down] key for about 10-15s [The phone is the logo stand. Do not worry, it is not stuck, but in the so-called Fast Boot Mode]
• plugs in the phone to the PC
• Start the root_v5.2.bat
• The program will first check whether the device is in fastboot mode.

• If the check was Posotiv -> ENTER
• Driver သိ လွ်င္ ေအာက္ ကပံု လို မ်ိဳး ၿပ မယ္ ။မသိ ရင္ အေပၚ ကလို ၿပ ပါမယ္ ။
• 
  
• The script then loads another recovery
  
• Now disconnect the device from the USB cable and remove the battery
• Hold POWER and VOLUME UP simultaneously firm and sets the purely battery (keys continue to hold, do not release when a menu appears)
• On the Händy then a menu appears we are in recovery mode ..

Now we have 2 options: Fully Automatic (recommended) or manually. Is your decision. Both goes. 



Chapter III version 1 - root -install fully automatic

• Holding the phone via USB to the computer freezes and wait until the Windows Typical USB Geräausch angestöpselt noise comes
• let the script go through the next step 
  (it runs 3x through security)
• Confirmed on the phone with the power button to reboot

Chapter III version 2 - Install rooot - Manual

• Get moving with the VOLUME DOWN button to the info install zip from sdcard and confirmed with the power button
  
• choose zip from sdcard and confirmed with the power button
• selects the Superuser -3.0.7-signed.zip EFGHI- out & confirmed with the power button
• Navigated in the prompt to Yes and confirm with the power button
• 
•  
• Root explorer သြင္းၿပီး ၀င္ လိုက္ပါ  root access ေတာင္း ရင္ root ၿပီး ပါ ၿပီ ။

ဒီမွာေဒါင္း ပါ ။
Download Here

Attached Files

	Superuser-3.0.7-signed.zip EFGHI (613.0 KB, called 4529x)
	Root_Y200_v5.2.zip (5.98 MB, 5560x)