Mobile House မန္ဘာ မ်ား ေက်းဇူး ၿပဳ ၿပီး မွ တိုက္ ရိုက္ ၀င္ေပး ပါ ရန္ ႏွင္႔ အသစ္ တင္ သမွ် ကို သိရွိ ေစရန္
မွာ Like လုပ္ ေပး ၾက ပါ ....

Saturday, December 17, 2011

Jailbreak for 3.1.3 ipod or iphone

ကၽြန္ေတာ္ေတြ႔မိတာေလးတစ္ခုတင္ခ်င္ပါတယ္.. မေတာ္တဆ 3.1.3 ကို update လုပ္လိုက္မိသူမ်ားအတြက္ပါ.. မေတာ္တဆ လုပ္လိုက္မိသူမ်ားအတြက္ေတာ့ လုပ္ၾကည့္သင့္တယ္ထင္လို႔ တင္ေပးလိုက္တာပါ..

ဒါေပမယ့္  1st Generation iPod Touches, 2nd Generation iPod Touches,1st Generation iPhones and 2nd Generation iPhones ေတြမွာဘဲရမွာပါ 

 DO NOT try this on any other models, this will not work on ANY devices with the MC serial number, this includes the 3GS, 3G iPod Touch, and newer 2G iPod Touches. Some iPods have a serial starting with a P. This will work with PA and PB serials, NOT PC.

If you have a 1st Generation iPod Touch, or iPhone that does not have the MC serial number, you will need to use RedSn0w 0.9.2. If you have the 2nd Generation iPod Touch, you will need RedSn0w 0.9.4. I only tested with 0.9.2, I would recommend downloading both of them and seeing which one works for you. 

Download Links (you will need WinRAR, both of these links are for WINDOWS, you will have to locate different ones if you are on a MAC):



Once you have downloaded RedSn0w, you will need to find the 3.1.2 Firmware, yes, the 3.1.2 Firmware for your device. [REDACTED]

Once you have found your Firmware, connect your iPod Touch or iPhone to your computer. Now, turn it OFF. Make sure that it is NEWLY RESTORED.

Now, you are going to want to start up RedSn0w.

If you are using RedSn0w 0.9.2, you will have to put your iPod or iPhone into DFU Mode, if you are using RedSn0w 0.9.4, you are going to have to just put it in Recovery Mode. This guide will focus on the RedSn0w 0.9.2, you can follow the on-screen instructions, they are easy to follow. 

You are going to now select the corresponding Firmware for your device. For this, I used the iPod1,1_3.1.2_7D11_Restore.ipsw file. YOU NEED TO SELECT THE 3.1.2 VERSION, RedSn0w will not detect 3.1.3.

Once you have done this, select Cydia from the check-boxes. Do not select anything else unless you want a custom boot logo or something along those lines.

Now hit Next> and your iPod or iPhone will need to be put into DFU mode OR Restore mode. This is easy to do, just follow the on-screen prompts. If your iPhone or iPod turns on, you will need to do the process over again from the beginning.

Once you are done, you will see some stuff appear on your iPhone or iPod, please leave RedSn0w up and running until the process is finished. This is some of the things that you will see on your iPod or iPhone. 

Once the process is completed, your device will reboot.

Now, you will see Cydia on your second page of applications.

Congratulations! You have just jailbroken your device on 3.1.3 firmware. 

No comments:

Post a Comment

Mobile House
ဖုန္း ၿပဳၿပင္ ေရး ႏွင္႔ အေရာင္းဆိုင္

ဖုန္းၿပဳၿပင္ ေရးနည္းပညာ သင္တန္း

လမ္း၃၀ ၊ ၇၃-၇၄လမ္းၾကား ၊,ေဆးေက်ာင္းေရွ႕ ၊မႏ ၱေလးၿမိဳ႕ ။

Admin = ရဲရင္႔ေအာင္

Note: Only a member of this blog may post a comment.