PSW Using Sn0wbreeze

teps to Create iOS 4.3.3 Custom IPSW Using Sn0wbreeze 2.7:

1. Launch Sn0wbreeze-2.7.exe. Either click on Browse button to choose stock iOS 4.3.3 IPSW for your iDevice or simply drag it in Drag an IPSW into me! section. In this case, i will be choosing iPhone3,1_4.3.3_8J2_Restore.ipsw as i want to jailbreak my iPhone 4 on iOS 4.3.3.



2. Now wait while Sn0wbreeze verifies the provided IPSW and identify your iDevice from it.


3. Once Sn0wbreeze has successfully identified your iDevice from the provided IPSW, click on the Next button to continue.


4. Now you will see the following three jailbreak modes. Choose Expert Mode and click on Next button to continue.



BASEBAND PRESERVATION MODE: This mode only preserves the iPhone's baseband. It does not jailbreak or unlock the actual device. All other modes still do preserve the baseband.
SIMPLE MODE: Recommended for people that don't know what to add. This mode will add Cydia, afc2, SSH for Apple TV and other recommended stuff automatically.
EXPERT MODE: Expert mode let you have all customizing options at your disposal. Such as custom boot logos, root partition size, installer options and unlocks.

5. Click on General tab followed by a click on Next button.



For iPhone 4 Users:

• Choose Activate the iPhone [Hacktivate] option if you rely on unlock or do not have official carrier SIM to activate your iPhone manually through iTunes.
• Choose Enable Animated Boot Logo Capability option (Optional)
• Choose Install SSH option (Optional)
• Choose Enable Gestures Menu option (Optional)
• Click on the Next button to continue.



For iPhone 3GS Users:

• Choose Activate the iPhone [Hacktivate] option if you rely on unlock or do not have official carrier SIM to activate your iPhone manually through iTunes.
• Choose Enable Animated Boot Logo Capability option (Optional)
• Choose Install SSH option (Optional)
• Choose Enable Gestures Menu option (Optional)
• Click on the Next button to continue.


• If your iPhone 3GS has baseband (05.14.02, 05.15.04, 05.16.01 or 05.16.02) which Ultrasn0w 1.2.3 can not unlock directly then you should choose Install 06.15.00 iPad baseband option to unlock your iPhone after the jailbreak. Note that upgrading to iPad baseband MAY loose you GPS functionality. iPhone Dev-Team has already promised to devise a downgrade method for iPad baseband in near future.



• Make sure you have active internet connection if you want to update your baseband to iPad baseband. Click on the Next button to continue.

For iPod Touch 4G/3G & iPad Users:

• Choose Enable Animated Boot Logo Capability option (Optional)
• Choose Enable Battery-Percentage option (Optional)
• Choose Install SSH option (Optional)
• Choose Enable Gestures Menu option (Optional)


• Click on the Next button to continue.
6. Click on the Build tab followed by a click on Next button.


7. Now wait while Sn0wbreeze cooks iOS 4.3.3 custom IPSW for your iDevice. Mean while you can play PacMan game by clicking on the PacMan button. You will be needing Adobe Flash Player installed in your Internet Explorer to play this game.


8. Once Sn0wbreeze has created iOS 4.3.3 custom IPSW for your iDevice, you can find it on your desktop. Click on the OK button to put your iDevice into Pwned DFU Mode.



iPhone 4 (GSM) » sn0wbreeze_iPhone 4-4.3.3.ipsw
iPhone 4 (Verizon) » sn0wbreeze_iPhone 4-4.2.8.ipsw
iPhone 3GS » sn0wbreeze_iPhone 3GS-4.3.3.ipsw
iPod Touch 4G » sn0wbreeze_iPod Touch 4-4.3.3.ipsw
iPod Touch 3G » sn0wbreeze_iPod Touch 3G-4.3.3.ipsw
iPad (1st-Gen) » sn0wbreeze_iPad-4.3.3.ipsw

9. Now use the following instructions to put your iDevice into DFU mode:
• Connect your iDevice to your PC via USB cable.
• Turn OFF your iDevice completely by pressing the Power button.
• Hold down the Home+Power button for exactly 10 seconds. After 10 seconds, release the Power button but keep holding the Home button until Sn0wbreeze detects your iDevice in DFU mode.
10. As soon as Sn0wbreeze will detect your iDevice in DFU mode, it will put it in Pwned DFU Mode by patching the iBoot of your iDevice with Limera1n exploit. This will bypass all 16xx errors (1600, 1601, 1602, 1603 & 1604) during the restore of custom IPSW through iTunes.



11. Close all opened windows of Sn0wbreeze and launch iTunes. Click on the name of your iDevice from the side-panel to view the summary-page.


12. Now you will see two buttons i-e Check for Update and Restore. Hold down the SHIFT key on keyboard and click on Restore button. Choose iOS 4.3.3 custom IPSW from your desktop and leave the rest on iTunes.


13. Once restore process is complete, your iDevice should reboot automatically. If you rely on an unlocked iPhone, you can use Ultrasn0w 1.2.3 to unlock your iPhone on iOS 4.3.3. Just follow step-by-step guide here to unlock your iPhone 4/3GS on iOS 4.3.3 using Ultrasn0w 1.2.3. Once unlocked, you can follow this guide to activate your iPhone on iOS 4.3.3 officially using SAM.